Shutting Down The Tool - Weidmuller EPG-Serie Originalbetriebsanleitung

► Whenever necessary you can stop the tool
by pressing the return button.
► Press the return button and hold it to open
the cutting head completely.
► Place the wire between the cutting blades.
24
► Press the start/stop button and hold it until
the cut is completed and the service and op-
erating LED lights green.
The cutting head will be opened automatically
after the cut is completed.

4.3 Shutting down the tool

► Press the start/stop button and hold it until
the cutting head is completely closed.
1.
2.
► To remove the battery, press both unlocking
buttons simultaneously and pull off the bat-
tery.
1.
2516410000/03/07.2019