Samsung RF A9771-Serie Serviceanleitung Seite 10

Hinge Low
4
RF9000A_User-servicing-manual_26lang.indb 10
1. Remove the 2 bolts (4, 5) with a 10 mm
socket wrench and then separate the lower
5
hinge.
* When reassembling the hinge, be sure to
fix it in the following order to prevent the
hinge from moving : Bolt (4) g Bolt (5).
2. Reassemble in the opposite order of
disassembly after replacing the top,
middle, and/or bottom hinge.
CAUTION
• Make sure the wire connectors are
connected properly.
• Be careful not to damage the wires when
fastening the top cover.
English
2021-01-14 2:03:08