Maintenance - eta AZURIT Bedienungsanleitung

GB
Squeegee for windows and flat surfaces (B9) – Particularly for cleaning windows and
Mopping/Floor nozzle (E) – Is to be used to clean smooth/hard flooring, parquets and can
Mopping textile (F) – Textile is recommended especially is suitable for cleaning hard floors,
Carpet cleaning adapter (G) – To remove only be used when refreshing carpets.
After finishing cleaning
1) Disconnect the power cord from the mains, operation light indicator will turn off.
2) Let the appliance and accessories cool down.
3) Pour out the excessive water, and let the water tank A4 dry out.
4) Remove the accessories/textiles, and store the appliance.
– Do not use the cleaner without the Mopping textile (sleeve) F attached to the Mopping /
Floor nozzle E.
– Do not use the carpet cleaning adapter G for cleaning hard floor types.
– To prevent solution from leaking ensure the foot pedal E4 is in the OFF position when
the product is not in use.
V. MAINTENANCE (Fig. 15)
Turn off the appliance before any maintenance, unplug the fork of the power cord
from the power supply socket and let it cool down! If you are going not to use the
appliance for a long time, let it dry, including the accessories. Do not use rough and
aggressive detergents! Carry out surface maintenance only (wipe off dust etc.).
For removing old dust or other impurities, use a soft damp cloth. Mopping textiles may be
cleaned by manual rinsing in clear water, or you can use wash machine (max. 40 °C), do not
use bleach or fabric softener.
Then let the mop/textile completely dry out. Water filter A5 protects the appliance from
incrustation. Depending on the use frequency and the water hardness level, the filter
becomes clogged after some time, and its effectiveness will decrease. Therefore the filter
status must be regularly checked. When the grains turn dark, it is advisable to replace the
filter (ETA order code is ETA226700120
on the use frequency and the water hardness level. If the water filter A5 must be replaced, pull
it out from the steam cleaner body (see the Fig. 14). Ensure that the contact surface and the
sealing elements are in order.
If the power cord is soiled, wipe it with a wet cloth. Store the cooled down and dry appliance
at a safe and dry place, out of reach of children and incapacitated persons. Do not put the
assembled assembled mop steam cleaner on an uneven surface! The assembled mop steam
cleaner must be placed on a flat surface where there is no danger of knocking over. In this
position, the mop nozzle will automatically lock (a click will be heard).
It is recommended to clean the water tank occasionally (approximately after 10 – 15 fillings).
You can remove the scale by regular rinsing. Fill the tank with water and shake it.
be used to clean paving.
parquets and can be used to clean paving.
Attention
. The filter lifetime is about 3-6 months, depending
)
various non-glass surfaces.
30 / 59