Ip Address And Subnet Mask; Art-Net Parameters Net And Subnet; Setup Channel 1 And 2 - EuroLite dxt Serie Bedienungsanleitung

IP address and subnet mask

Use the encoder to cycle to the network menu. Pressing the encoder switches the cursor to an underscore. Now
you can cycle to the desired parameter, which you can edit after pressing (highlighted in white). Press again to
save and apply the parameter.
Frequently used values for the IP address are '2.0.0.xxx', '10.0.0.xxx', '192.168.178.xxx' or '192.168.1.xxx'. Avoid
settings like 'xxx.xxx.xxx.255', because they will probably break your network! The netmask is usually something
like '255.255.255.000'. It has to be the same on all devices, which want to communicate. In the IP address usually
the first 3 blocks are identical across the network and the forth one is individual. The node reacts to Unicast, as
well as Broadcast ArtDMX packets.

Art-Net parameters Net and Subnet

The Art-Net net and subnet are set for all outputs. The range is 0 – 15.
Please note: Some programs use the range 1-16! This is mapped 1 --> 0 in the node, 2 --> 1 in the node, and so
on.

Setup channel 1 and 2

Here you can choose the output type of the port: DMX512 40Hz, DMX512 20Hz or digital LEDs. The Art-Net
universe has a range of 0-15.
Please note: Some programs use the range 1-16! This is mapped 1 --> 0 in the node, 2 --> 1 in the node, and so
on. Channel 2 has the same configuration possibilities.
Network
IP Address
192.168.001.020
Net Mask
255.255.255.000
ArtNet Setup
Net: 00
Subnet 00
Channel 1
Type: OUT 40 Hz
Universe 00
19 • EN