PACk CoNTENTS
Familiarize yourself with the part names and confirm that the parts are included:
1 x Allen key
18
TwINmAT ElEkTroNIk wC
1 x Valve body
1 x Wall flange
1 X Shut off valve
1 x Friction ring
1 x Pipe with vacuum breaker
1 x Spud coupling assembly
PrE-INSTAllATIoN INfo
Check contents
Separate all parts from the packaging and check each part with the "Pack contents"
section.
Pay attention to the different models variations.
make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic faucet until you obtain
the missing parts.
warnings
Do not install facing a mirror or any other electronic system operated by an infrared
sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
1.50 meters between the product and any other objects.
NOTE: keep a minimum distance of 500mm between the upper surface of the bowl
and the infra red sensor.
Preparation for installation
Flush water supply lines thoroughly before installing the flush valve. Do not allow dirt,
Teflon tape or metal particles to enter the product.
Shut off water supply.
Important
All plumbing is to be installed in accordance with applicable codes and regulations.
19