Connecting The Channel Extension To The Din-Rail Timer - Intermatic GRASSLIN talento smart CE2 Bedienungsanleitung

Connecting the channel extension to the DIN-rail timer

Preparing for the connection
Fig. 7: Establishing the Bluetooth connection on the DIN-rail timer
1. Press the Bluetooth button (Fig. 7/1) on the DIN-rail timer.
Fig. 8: Establishing the Bluetooth connection on the channel extension
2. Press the Bluetooth button (Fig. 8/1) on the channel extension.
The operation must be completed within two minutes, otherwise the operation
has to be repeated.
After a connection has been established once, the DIN-rail timer automatically
connects to the mobile device when it is in the vicinity.
The Bluetooth connection is maintained for two minutes in the event of a power
failure.
EN
43