Kripsol HIDROJET JSH Betriebs- Und Wartungsanweisung Seite 19

Hidrojet Sena:Hidrojet Sena.qxd 20/02/2012 10:21 Página 19
9. PVC KITS FOR JS70/JS78/JS88
9.1 Installation of PVC kit for models
JSH/JSL70, JSH/JSL78 and JSH/
JSL88:
Models JSH/JSL70, JSH/JSL78 and
JSH/JSL88 include a PVC kit for the
installation of the suction line (Ø 90 mm.)
and discharge line (Ø 75 mm.) (see
table below).
Installation of the suction line:
- Glue a Ø 75 mm. pipe (*) to the discharge
mouth of the niche (see fig. 7).
- Glue the Ø 75mm. valve (no.1, fig. 7)
to the Ø 75mm. pipe (*).
- Glue a Ø 75mm. pipe (*) to the Ø 75mm
valve (no.1, fig. 7).
- Glue the Ø 75mm. elbow (no.2, fig. 7)
to the Ø 75mm. pipe (*).
- Glue a Ø 75mm. pipe (*) two the elbow
(no.2, fig.7).
- Glue a 90/75/63 mm. conical reducer
(no.3, fig. 7) to the Ø 75mm (no.2, fig. 7)
and the Ø 90mm. connector on the
pump.
A
Installation of the suction line:
- Using a Ø 90mm. pipe (*), glue a Ø 90
mm. elbow (no.4, fig. 7) on to the suction
mouth on the niche (see fig. 7).
- Using a Ø 90mm. pipe (*) joint the
other Ø 90mm. elbow (no.4, fig. 7) to
the elbow already glued (see fig. 7).
- Glue the Ø 90mm. valve (no.5, fig. 7)
to the elbow (no.4, fig. 7) using a Ø 90
mm. pipe (*) to join them.
- Glue a Ø 90 mm. pipe (*) to the valve
(no.5, fig.7) and to the Ø 90mm.connector
on the pump.
(*) PVC pipes not included in the kit
PVC KIT JSH/JSL70, JSH/JSL78, JSH/JSL88
No.
1 Ø 75 mm. Ball Valve
2 Ø 75 mm. 90º Elbow
3 90x75x63mm. Conical Reducer
4 Ø 90 mm. 90º Elbow
5 Ø 90 mm. Ball Valve
B
C
Fig. 7
19
DESCRIPTION QTY.
MODEL A B
JSH / JSL70 165 1105
JSH / JSL78 165 1165
JSH / JSL88 165 1165
1
1
1
2
1
C
700
700
700