Manual Release - Rollei 28145 Bedienungsanleitung

5. Timer photography
32
5.6 Shutter speed is selected by camera
Using the camera to set the shutter speed, please adjust the settings as shown
in the table below:
Camera
Timer remote control Exposure time
If possible, select release priority.
To ensure that the camera has sufficient time to focus, when using AF, select
an interval of at least 2 seconds longer than the shutter speed of the camera.
When using the long exposure NR function (for some digital camera only),
select at least the camera shutter interval two timers longer.

6. Manual release

The shutter release of timer remote control has the same function as the shutter
release on your camera.
6.1 Adjust camera settings
Please connect the remote control with your camera and turn both devices on.
Then select the exposure mode, shutter speed, focus mode and shooting mode
as needed.
6.2 Picture shooting
Half-press the shutter release button (5) and hold it in this position to start
the AF. The indicator light will flash in blue. Then press it fully down to take the
picture. When the shutter is active, the orange indicator light will flash and the
transmitter makes a "Beep" every second. The time when the shutter has been
opened will be displayed in the display panel.
Exposure mode
Shutter mode
Focusing mode
Photo mode
ENGLISH
M (manual) or S (shutter priority)
Random speed
AF-C (Continuous automatic focus)
or M (manual
S (single)
0s