Automatic Timer - Rollei 28145 Bedienungsanleitung

3. Battery installation
26
3.4 Connection with camera
1. Turn off the camera and make sure that the remote control is also switched off.
2. Remove the shutter socket terminal cover from the camera. Insert the
appropriate plug from the connection cable into correct socket for the remote
release on the camera. Then insert the 2.5 mm plug into the remote control
port (9).
3.5 Disconnect the remote control
Turn off the camera and the remote control and disconnect the remote control,
and then close the shutter socket terminal cover.
4. Use the remote control
The timer remote control has the following functions:

Automatic timer:

Please choose the delay time of the interval shooting (the time before shooting
starts), the exposure time, the interval time and the number of photos. If your ca-
mera is not in BULB mode but the shutter speed is selected in your camera directly
(manual mode), you can release the shutter via the remote control. But please note
that the shutter speed of your camera will be taken for the photo.
Manual release:
Use the shutter release button on the transmitter to take pictures manually. That
means as soon as you shortly press or hold the shutter release button a photo will
be taken in the time while the button is pressed.
ENGLISH