SUPERTOOTH ONE Bedienungsanleitung Seite 15

you to say the voice tag of the contact to call and the Bluetooth
Indicator (7) will turn steady blue.
3. Say the voice tag exactly as how you recorded it.
4. The voice tag will be played back to you and then the phone will
dial the number automatically.
Redial (For Handsfree Profile Phones only):
Press the MFB (1) for 3 seconds. The last dialed number will be
redialed.
Reject a Call (For Handsfree Profile Phones only):
During the ring tone, press the End/Reject Button (4) for 1 second.
The incoming call will be rejected.
Volume Setting:
Increase or decrease the volume by pressing the Volume Up (3) or
Volume Down (2) button. Press repeatedly until the desired level is
reached. The Bluetooth Indicator (7) will turn violet as lowest and
highest levels are reached.
Audio Transfer (For Handsfree Profile Phones only):
During an ongoing call, you can transfer the audio.
Kit to Phone: press and hold the MFB (1) for 3 seconds and the
audio will be transferred to the phone.
Phone to Kit: press the MFB (1) for 1 second and the audio will be
transferred to the handsfree kit.
Note: for some phones, you may need to accept a connection prompt on
the phone before automatic transfer takes place.
H. Stream Music from your A2DP Bluetooth
Mobile Phone:
If a phone supports A2DP, you can stream music from your phone
to the SUPERTOOTH ONE.
Note: the SUPERTOOTH ONE needs to be 'paired' with your Bluetooth
mobile phone before you can use the following functions. (See "Pairing to
your Bluetooth Mobile Phone on section E".)
Using A2DP Music Streaming
To Stream Music:
• Go to your phone's music player and play a track via A/V Bluetooth.
(See your phone's manual).
• Or Double Short Press the MFB (1) to play / pause music streaming.
To Set the Volume:
• Press the Volume Up (3) or down (2) button repeatedly until the
EN
BTPPONE
15