Power On/Off - SUPERTOOTH ONE Bedienungsanleitung

2. When fully charged, disconnect the charger.
D. Power On/Off
Power On: press the MFB (1) for 1 second, until the Bluetooth
Indicator (7) turns blinking blue. A beep will be heard.
Power Off: press and hold the MFB (1) for 5 seconds, until the
Bluetooth Indicator (7) turns red. A beep will be heard.
E. Pairing to your Bluetooth Mobile Phone
Pair the SUPERTOOTH ONE to your Bluetooth mobile phone to
create the link or audio connection between the two. The pairing
process is required only once for each phone.
1. From OFF, press and hold the MFB (1) for 5 seconds until the
Bluetooth Indicator (7) turns blinking red/blue. The handsfree kit is
now in pairing mode.
2. While the handsfree kit is in pairing mode, access the Bluetooth
menu of your phone. Turn on the Bluetooth function then execute a
Bluetooth search. (See your phone's manual.)
3. When the phone displays the list of Bluetooth devices, select ST
ONE.
4. When the phone asks for the password/pin code, enter 0000 and
press Ok.
5. The handsfree kit is now ready to use.
F. Installation
1. Place the clip in the slots at the back of the SUPERTOOTH ONE.
2. Slide the clip to its closed side until it locks.
Warning: Do not force on the switches while inserting the clip.
3. The closed side of the clip should be aligned with the top or the
bottom of the SUPERTOOTH ONE.
Note: the clip can be attached to the unit in 2 ways, to suit any position
on the sunvisor.
EN
BTPPONE
13