Technical Data; Maintenance Recommendations - AM.PM LIKE Bedienungsanleitung

English
Important notes
about installation
The product must be fitted exclusively
by a specialist sanitary engineer.
To prevent injuries gloves should be worn
during installation.
Generally accepted engineering practices
should be applied. (In particular, compli-
ance with DIN EN 1717 is recommended).
The hot and cold supplies must be
of equal pressures before installation
of mixers.
WARNING
Drain system completely if danger
of frost.

Technical Data

Operating pressure:
Recommended
operating pressure:
Hot water temperature:
Recommended hot water
temperature:
Thermal disinfection:
The product is exclusively designed
for drinking water.
4
max. 1 MPa
0,1 – 0,5 MPa
max. 75°C
65°C
70°C (3 min)
Maintenance
recommendations
To avoid lime spots at the product it is rec-
ommended to be regularly cleaned. The
cleaning should be carried out by soap
solution with the following rinse with water
and removing moisture by dry soft cloth.
Remains of liquid soap, shampoo and
shower gel may also cause damages of
decorative cover. In case of their penetra-
tion onto the diverter housing it should be
thoroughly cleaned with clean water
To avoid damages of product surface it is
forbidden to use abrasive solutions and
pastes for its cleaning.
To avoid changes color of decorative
cover it is forbidden to use chemicals for
cleaning that contain aggressive chemical
substances of acids, alkali, ammonium
chloride and other components containing
chlorine.
Producer reserves the right without prior
notice to introduce alterations into design
and component parts of devices.