Werbung
Verfügbare Sprachen
Verfügbare Sprachen
23900 Quick-Release adapter
23900
for microphones
Information for use
Intended use
The Quick-Release Adapter enables the changing of microphones or other accessories with a 3/8" thread.
This alllows to change equipment quickly and easily on stages, studios or in rehearsal rooms. The adapter
can be mounted on all stands with a 5/8" or 3/8" thread. The two threaded bolts (supplied) allow an imme-
diate change of accessories.
Foreseeable misapplication
Do not unscrew the Quick-Release adapter from the stand while a microphone or other accessories are a
ttached.
General
u Use a suitable stand. The stand should have sufficient stability and load-bearing capacity.
u
Please observe the usage instructions of the stand in use.
u The user should be physically fit and technically competent.
u The Quick-Release adapter should be firmly screwed onto the stand.
u When changing equipment, make sure that the threaded bolt in the quick-release adapter is engaged.
u Do not remove the Quick-Release adapter when the microphone or accessories are attached.
u The falling down of accessories may cause personal injury or damage to property.
Warranty
No warranty is given for damage caused by:
u Non-observance of the usage information and the "General safety and assembly instructions".
u Unsuitable or improper use.
u Incorrect installation or commissioning by the buyer or third parties.
u Natural wear and tear.
u Careless handling.
u Improper modifications or repair work by the buyer and third parties.
u Impact on components of foreign origin.
u Use of non-original spare parts.
Modifications, additions and conversions that may impair safety are prohibited without the manufacturer's
approval.
Technical data
Material
Load capacity
Dimensions
Packing
Weight
Maintenance, cleaning and repair
u Maintenance: Regularly check that the screw connection is tight.
u Cleaning: Use a slightly damp cloth to clean the Quick-Release adapter. Do not use chlorinated or
u
abrasive cleaning agents. These will cause damage to the surface and varnish.
u Repair: Repair any damage immediately and stop using the Quick-Release adapter. Repair work may
u
only be carried out if you have the necessary knowledge. If any parts are missing, contact the manu-
u
facturer at www.k-m.de. Here you can find a corresponding spare parts list by entering the article
u
number on the type label. Use this page to reorder missing or damaged components.
Threaded bolt: Steel, galvanised.
Housing upper part, thread reduction, locking: plastic, black, grey.
Housing lower part: Aluminium, anodised black.
Pressure spring: Steel, bright.
Microphones or other accessories with matching thread.
82 x ø 27 mm
98 x 48 x 31 mm
0.1 kg
Werbung
