TensCare Sonic Stim+ Bedienungsanleitung Seite 28

Note: At 80 MHz - 800 MHz the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures,
objects and people
Field strengths from fixed transmitters, such as base stations for radio
(cellular/cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TY broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment
due to fixed RF transmitters, an electromagnetic site survey should be
considered. If the measured field strength in the location in which the
Sonic Stim + device is used exceeds the applicable RF compliance level
above, should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such
as reorienting or relocating the Sonic Stim +.
Over the frequency range 150 kHz - 80 MHz, field strengths should be less
than 3 V/m.
Table 4
Recommended separation distances between portable and mobile RF
communications equipment and the Sonic Stim + device
The Sonic Stim + is intended for use in an electromagnetic environment in
which radiated RF disturbances are controlled. The customer or the user
of the Sonic Stim + can help prevent electromagnetic interference by
maintaining a minimum distance from portable and mobile RF
communications equipment (transmitters) as recommended below,
according to the maximum output power of the communications
equipment.
Rated
maximum
Separation distance according to frequency of
Interference may occur in
the vicinity of each
frequency range.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
transmitter / m
26