Inhaltsverzeichnis
Werbung
•
Check if the engine switch is at ON position;
•
Check if there is enough engine oil in the crankcase;
•
Check if there is spark plug spark;
Dismantle the spark plug cap. Clear away dirt around the spark plug, and then dis-
o
mantle it.
Install the spark plug into the spark plug cap.
o
Turn the engine switch at ON position.
o
Ground the side electrode by touching the engine; pull the kick-starter to check if there
o
is spark.
If no spark, please start the engine according to "Starting the Engine" in the manual.
o
If the engine still cannot start, contact your dealer for help.
9.2 Water pump cannot pump
Check according to the following:
•
Check if there is enough water;
•
Check if the filter is clogged;
•
Check if the hose clamp is tightened securely;
•
Check if the water hose is damaged;
•
Check if the required suction height is too high;
If the water pump still cannot pump water, please contact your dealer for help.
10. SPECIFICATIONS
TYPE
SIZE
INLET
OUTLET
ENGINE
POWER
SPEED rpm
LIFT
SUCTION
Self-priming time sec / 4m
FLOW max 1 m³ = 1000l
CONTINUOUS WORKING TIME
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Deutsch / English / Français
SCWP-30G
515x410x460
80mm
80mm
6.5Hp
4.1kw
3600
26m
5m
120
60 m³/h
2,5h
SCWP-30GT
550x445x430
80(3'')mm
80(3'')mm
6.5HP
4.7kw
3600
25m
5m
55
78 m³/h
2,5h
Version 4.0
Seite 40
Werbung
Kapitel
Inhaltsverzeichnis
