Herunterladen Inhalt Inhalt Diese Seite drucken

Shut It Off; Maintenance - WilTec DP50 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

5. TURN IT OFF
To stop the engine in an emergency, simply turn the engine switch to the OFF position. Under normal
conditions, use the following procedure.
5.1 Move the throttle valve lever to the LOWER position.
5.2 Turn the engine switch to the OFF position.
5.3 Turn the fuel cock to the OFF position.
After use, remove the water drain plug, and drain the pump chamber. Remove the water filler
cap, and flush the pump chamber with clean, fresh water. Allow the water to drain from the pump
chamber, then reinstall the water filler cap and water drain plug.
NOTE
After stalling the engine in emergency, turn the engine switch to OFF position.

6. MAINTENANCE

To keep the water pump at optimal performance, checking and adjusting it periodically
is necessary. Regular maintenance and service may extend its service life obviously. The
Maintenance Schedule below specifies how often you should have your water pump served,
and what things need attention.
WARNING:
Before maintenance, shut off the engine. If maintaining the engine while running,
make sure to perform any check in a well – ventilated area. Emissions from the
engine contain toxic carbon monoxide (CO), which may cause loss of conscious-
ness and even life if exhausted.
Maintenance Schedule
NOTE
When used in extremely dusty area, perform this job more often.
The maintenance should be done by your dealer, unless you are equipped with proper repair
tools, and are qualified mechanically.
CAUTION:
Only use original spare parts and specified maintenance tool or the water pump
may be damaged.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.info
Deutsch / English / Français
Seite 36
Version 4.0

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pp50Dp80Pp80Dp100Pp100

Inhaltsverzeichnis