Maintenance - Cata Purifyer DREAM Anweisungen Für Die Installation, Den Gebrauch, Die Wartung

Connecting/disconnecting via Bluetooth
If you have previously paired your purifier with the application or another external
device, you can remotely control it at all times. Move the external device close to
the purifier and it will automatically recognise it.
NOTE
NOTE
pressing the corresponding icon. You will not have to complete the
pairing process again.

MAINTENANCE

Initial instructions before carrying out maintenance.
IMPORTANT
• Before carrying out any maintenance operation, stop the appliance
and unplug it.
• The maintenance operations the user is permitted to carry out are
limited to filter changes.
• Never submerge the appliance in water or other liquids.
• Do not use abrasive, aggressive or inflammable cleaning products to
clean any part of the appliance.
Filter cleaning and replacement
Filter
PRE-FILTER
ACTIVATED CARBON
FILTER
HEPA H13 FILTER
NONVIRAIR®
STERILISATION CELL
*The cycles in the table are approximate and depend on the operating hours and
level of contamination of the installation location.
44
: To disconnect the Bluetooth function, press the Bluetooth icon.
: You can reactivate the Bluetooth function at any time by
Maintenance
method
Clean
-
Rotate filter po-
sition
Filter replacement
-
Replacement time *
A warning is issued (see p. 45)
Cycle of approximately 4
weeks*
-
A warning is issued (see p.48)
Cycle of approximately 6-12
months*
A warning is issued (see p. 48)
Cycle of approximately 1-2
years*
-
Spare part
code
02894007
-
-
02894006
-