Cata Purifyer DREAM Anweisungen Für Die Installation, Den Gebrauch, Die Wartung Seite 40

Press ON/OFF again to start the air diagnosis process. The control lights up all
the available operating modes and the front display shows the self-diagnosis
2
process.
The purifier starts to gently operate in AUTOMATIC MODE.
NOTE
Warning! This process can take up to 5 minutes. However, you can
change the operating mode if you prefer, taking into account that
the purifier cannot operate autonomously until results have been
generated.
Clean
air
Moderate/high
contamination
Once the diagnosis has been com-
pleted, the purifier reports the air
quality in accordance with a colour
code.
Note: If the user has not changed
3
mode during the process, the
process will start to operate
autonomously in AUTOMATIC
MODE, adjusting the purification
speed in accordance with the
detected level of contamination.
40
: The indicator light is white during this process.
Low
contamination
Dangerous
contamination
Press the icon of the chosen
filtration mode. If you do not press
anything, the purifier will continue
to work in AUTOMATIC MODE.
4