Keyboard /Display; Horizontal Operation; Tilt Function - THEIS VISION H Gebrauchsanleitung

Keyboard /Display

Laser exit rotation
Battery compartment
Charging socket

1. Horizontal Operation

Align the tripod and screw the VISION tight using the
tripod screw. Use the On/Off switch to switch on the
device.
The Laserbeam and the levelling LED is blinking.
If the tripod head is sloping by more than 5°, this is in-
dicated by the laser beam flashing quickly and the
Level LED.
In this case, switch off the unit and align the tripod
more carefully.
Once horizontal levelling is completed, the laser beam
starts to rotate at the last set speed. The LED goes out.

2. TILT Function

In the case of major changes to the mounting position
(e.g. accidentally moving the tripod leg), a TILT
function ensures that the device switches off and
draws attention to the fact by the laser beam and the
levelling LED flashing quickly.
Then the device must be rebooted.
On/Off
Battery
LED Levelling/
Display
Disturbance
16
Product-
information
Via QR-Code
on reverse, e.g.
Instruction
manual