ZAPTEC Go Schnellstartanleitung Seite 8

English
Important information
Before using or maintaining this product, it is important to read the following safety
instructions. Failure to follow and apply all the instructions and procedures covered in this
quick guide will invalidate the warranty and cause Zaptec Charger AS and direct partners
to waive all liability and claims for compensation.
WARNING!
!
Read the instructions carefully and familiarize yourself with the products before
installing or using the products.
!
This product must only be installed, serviced, and repaired by qualified personnel. A
Zaptec certified partner shall carry out the handling of defect products under warranty.
!
All applicable local laws and regulations must be followed during the installation
and/or service of the product.
!
Do not install or use a product which is damaged in any way.
!
Only use appropriate and certified installation materials for the installation.
!
Do not insert foreign objects in the products outlets during voltage and insulation tests
as well as after the installation has been carried out. Measurements to be performed
according to the installation instructions for the product.
!
Do not use high-pressure washer equipment on the products.
!
Avoid installing the products in locations exposed to high temperatures.
!
EVSE adapter is possible to use with the product; however, usage must comply with
local laws and regulations and resides outside the product specification and warranty.
!
Charging cable extensions are not allowed to be used with this product.
8