LENCO PPR-100 Bedienungsanleitung Seite 12

Setting the time
1. Switch the appliance on.
2. Press and hold MODE until the hour digits flash.
3. Use the <and> buttons to set the hours.
4. Press MODE. The minute digits will begin to flash.
5. Use the <and> buttons to set the minutes.
6. Hold down MODE until the display stops flashing. Or
simply wait a few seconds until the display stops
flashing by itself.
Adjusting the volume
You can set the volume to between 0 and 16.
 Increase volume: press and hold >.
A signal will sound once volume 16 is reached.
 Decrease volume: press and hold <.
A signal will sound once volume 0 is reached.
Muting the volume
 To mute the sound during playback, briefly
press . The display will begin to flash.
 Press
again to unmute it.
Selecting the operation mode
1. Switch the appliance on.
2. Repeatedly press MODE to toggle between the
different modes of operation.
®
blue: Bluetooth mode
FM: Radio mode (with time display)
Time mode (no audio playback)
12