TELEPASS SAT ETOLL2ST-1HEB V2 Betriebsanleitung Seite 24

EN
6. Connect the device to the
cigarette lighter socket.
7. Push the connector inside the
socket until you hear a click
sound.
Always keep the device connected to the power
source.
Make sure the power cable is not subject to
mechanical, thermal or chemical stress.
Do not change the inclination between the device
and its bracket.
SETUP
Select the language
à Language à
1. Press
2. Select the preferred language and press
24
Vehicle axles check
Consider all vehicle and trailer or semi-trailer axles, including
the double tandem axle and liftable axles. For caravans and
buses, do not consider any trailers. Check the number of
axles set on the device and change it if necessary.
Review the setting each time a trailer is hooked up
or removed.
Set the axles
à Axles à
1. Press
2. Select the correct number of axles and press
Vehicle weight check (LKW-Maut service only
in Germany)
Check the weight set on the device and adjust accordingly.
Set the vehicle's weight (LKW-Maut service
only in Germany)
à Weight load à
1. Press
2. Select the correct weight.
3. Press
View data
NOTICE: sanction risk. Before departing, make
sure data and real vehicle specifications match.
Telepass SAT | Operating instruction v. 1.11 OCT 2020 | © 2016-2020 Telepass