Shark IQ ROBOT SELF-EMPTY RV1000SEU Gebrauchsanweisung Seite 21

IQ NAVIGATION
As it cleans, your robot will create a map of your
home. It may take several cleans for the robot to
finish its mapping. Once mapping is complete, an
Interactive Map of your floor plan will be available
on the app.
MANUAL CLEANING MODE
To manually start a cleaning cycle, press the Clean button on the robot or on the mobile app. To stop the
robot before it finishes cleaning and automatically returns to the base, press the Dock button.
NOTE: Be sure to charge the robot completely before its first cleaning so that it can explore, map, and clean as much of
your home as possible. It may take up to 6 hours to fully charge the robot.
NOTE: Avoid picking up and moving the robot or base. If either are relocated, the robot may not be able to follow its
intelligent cleaning path, or find its way back to the base. If the robot is picked up or moved for any reason, it should be
returned to within 15 cm of its last location.
s h a r kc l e a n . e u
Dining Room
Kitchen
Living Room om
The interactive map in the app allows you to name
rooms, then select which rooms to clean, and send
the robot to immediately clean specific locations.
As cleanings continue, the robot will update and
refine its path to provide optimized cleaning coverage.
After each use, a cleaning report will be available
in the app.
USING THE SHARK IQ ROBOT SELF-EMPTY®
Please visit sharkclean.eu for answers to all your app questions.
USING THE SHARKCLEAN APP
Get the most out of your Shark iQ Robot Self-Empty® with these app features:
• Interactive Map
Your robot knows where it is
in your home. Identify rooms
for Room Select.
• Room Select
Dining Room
Kitchen
Living Room om
Immediately send your robot
directly to any room on that
floor.
• Recharge and Resume
Use Recharge and Resume
to help ensure complete,
multi-room coverage in your
home.
Search for SharkClean in the app store and download the app to your smartphone.
WI-FI TROUBLESHOOTING
• To use the app, your phone must be connected to
a 2.4 GHz network. The app will only work on a
2.4 GHz network.
• Typical home Wi-Fi networks support both 2.4 GHz
and 5 GHz.
• Do not use a VPN or a proxy server.
• DO NOT use Wi-Fi repeaters to connect your robot.
• If you cannot connect, visit sharkclean.eu.
ERROR CODE
! (RED) + Wi-Fi indicator (RED Flashing)
! (Flashing red) + Wi-Fi (RED)
! + Wi-Fi (Flashing RED alternately)
! + Wi-Fi (Flashing RED at the same time)
• Scheduling
Set whole home cleanings
for any time, any day.
• Control From Anywhere
Wherever you are, you're in
control of your robot.
• Cleaning Reports
Each time your robot cleans,
your app will generate a
cleaning report.
• Volume Control
You can adjust the volume
level of your robot's audio
notifications.
STILL CAN'T CONNECT?
Restart your phone
• Turn off phone, wait a few minutes, then turn it
back on and connect to Wi-Fi.
Reboot your robot
• Make sure the power switch on the back of the
BASE is in the ON position.
• Press the power switch on the side of the ROBOT
to the OFF position for 10 seconds, then press it
again to turn power back ON.
Reboot your router
• Unplug the router power cable for 30 seconds,
then plug it back in. Allow several minutes for your
router to reboot completely.
PROBLEM
Wrong password for Wi-Fi
SSID cannot be found, try connecting again
Wrong user name or password for your Shark account
Cannot connect to Wi-Fi
s h a r kc l e a n . e u