Intended Use; Optional Accessories - Kathrein CAS 120/W Bedienungsanleitung

CAS 120/W 20010008
CAS 120/W no logo 20010009
CAS 120/G
CAS 120/G no logo
CAS 120/G
O set parabolic antennas
Features
■
Refl ector made of aluminium, powder coated
■
Feed system support and refl ector rear part made of galvani-
sed sheet steel, powder coated
■
Optimal electrical data combined with very compact mecha-
nical dimensions due to o set feed
■
Items supplied: refl ector and feed system support,
■
The tiltable multifeed mounting device allows optimum set-
ting of the polarisation angle. In this way the feed systems
can be positioned for feeding into secondary focal points,
e.g. for multifeed reception
■
Without additional components, two universal feed sys-
tems to receive the signals of satellites 3° or 4° (e.g. ASTRA
19.2°/23.5°) or 6° apart (e.g. ASTRA/EUTELSAT-HOTBIRD) can
be mounted on the boom

Intended Use

The CAS 120 parabolic antenna is intended solely for the reception of satellite signals and for use only as a domestic antenna.
DIN 4131 specifi es that a domestic antenna should have no more than 6 m free mast length and a fi xed-end moment up to 1650 Nm.
The antenna may be installed only in conjunction with the ZAS 120 clamp (part no. 218672). The ZAS 120 is not supplied with the
parabolic antenna.
It is unsuitable for mounting on structures that are liable to vibration.
Make absolutely sure that the values for the maximum load listed in the Technical Data (on the last page) are complied with. If this
load is exceeded, parts could break away!
The CAS 120 parabolic antenna is designed both for use with one feed system (LNB) for reception of the signals from one satellite
position and also for use with two feed systems for multi-feed applications for reception of the signals from two satellite positions
with 3°-4° or 6° satellite spacing.
Do not use the parabolic antenna for purposes other than those listed in this manual! Any use other than that
specifi ed above will void the warranty or guarantee.
In particular, never
● modify any of its components or
● fi t any components other than those expressly intended by the manufacturer for use with the antenna.
Breach of these rules may lead to the antenna no longer being su ciently stable and safe!

Optional accessories

■
ZAS 120 Azimuth/Elevation support (BN 218672)
■
Stub mast ZAS 15 (BN 218603)
■
Wall mounting ZAS 16 (BN 218606)
■
ZAS 1218, order no. 204500011 multi-feed adapter plate
Without notches for any satellite spacing
20010010
20010011
20010012
■
If the satellites are spaced at 6°, an additional feed system
can be fi tted in the middle (3 satellites at 3° spacing each).
For other satellite spacings, the multifeed adapter plate ZAS
1218 (Order no: 204500011) is available (see „Optional acces-
sories" on page 11).
■
Additionally required for mounting:
Azimuth/elevation clamp ZAS 120.
11 / 36