Kathrein CAS 120/W Bedienungsanleitung Seite 15

d. Feed system (LNB)
The feed system(s) and instructions for their installation are
not included in the scope of supply of the parabolic antenna.
For more detailed information on their correct installation
please refer to the manuals supplied with the respective feed
system.
Using the multi-feed adapter plate on the carrier arm you
can install one, two or three Kathrein universal feed systems.
The markings on the adapter plate are as follows:
3 the installation position for one single feed system,
–
2 and 4 the installation positions for two multi-feed feed
–
systems at 3° – 4° satellite spacing,
1 and 5 the installation positions for two multi-feed feed
–
systems at 6° satellite spacing. With positions 1 and
5 occupied, a feed system can also be mounted in the
middle at position 3 (3 satellites at 3° spacing)
● Example for the installation positions for a multi-feed
application with 3° – 4° satellite spacing:
Item 2
ASTRA 19.2° East
ASTRA 23.5° East
EUTELSAT 16° East
EUTELSAT 13° East
EUTELSAT 10° East
Tip
For multi-feed applications the antenna should be
aligned towards the satellite which is transmitting the
weakest signal.
● Example for the installation positions for a multi-feed
application with 6° satellite spacing:
Pos. 1
ASTRA 23.5° East
ASTRA 19.2° East
EUTELSAT 16° East
HOTBIRD 13° East
Tip
For multi-feed applications the antenna should be
aligned towards the satellite which is transmitting the
weakest signal.
Item 4
EUTELSAT 16° East
ASTRA 19.2° East
EUTELSAT 13° East
EUTELSAT 10° East
EUTELSAT 7° East
(Pos. 3)
(ASTRA 19.2° East)
(EUTELSAT 16° East)
(EUTELSAT 13° East)
(EUTELSAT 10° East)
15 / 36
Multi-feed
adaptor plate
Pos. 5
EUTELSAT 16° East
EUTELSAT 13° East
EUTELSAT 10° East
EUTELSAT 7° East