Herunterladen Inhalt Inhalt Diese Seite drucken

Sanotechnik SANOSPA SPA08 Bedienungsanleitung Seite 54

Vorschau ausblenden Andere Handbücher für SANOSPA SPA08:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12. Operation to Long Circulation:
Press the key "
Circulation, The surf PUMPs and BLOWER will work once in 30 minutes, They will work 30
seconds; The OZONE will work once in 30 minutes, They will work 15 minutes. When one of
the surf PUMPS or BLOWER is working, The ozone will be turned off automatically.
13. Operation to Long Circulation:
"
"controlling the ON/OFF of the lamp in the bottom of the bathtub. Press "
for the first time, The LIGHTS are ON, and the color of LIGHTS are changing; Press "
again, the current color are changeless; Press "
14. Operation to Constant temperature heating:
(1)
When the pre-heating time is up (If the pre-heating has turned on) or press the "
will also start constant temperature heating system.
(2)
After the startup of constant temperature heating, circulation pump will be running all
the while.
(3)
For example: if the temperature is set at 35°C, when the water temperature reaches or
exceeds 36°C, the heater will be turned off automatically and the circulation pump will
stop after 5 second (If PUMP3 is turn off). However, when the water temperature reach
or lower than 34°C the heater will start up.
(4)
When the temperature sensor is open/short (LCD shows "E1"), the auto temperature
control system will not be available, Turning on/off the constant temperature system will
turn on/off the heater.
15. Operation to blower:
there is a key "
16. Fahrenheit & Celsiur temperature shift:
In the status of "Waitting Mode", pressing the key "
& Celsiur temperature.
17. When there is no water in the bathtub, water pumps, blower and constant temperature
system will not start up. However, the corresponding signal on the LCD will flash.
18. Frozen preventing control:
The heater & circulation pump will on when water temperature is under 5°C, And will off when
up 10°C The function is effective when power on.
54
" to turn on/off the Long Circulation.
" controlling the on/off of blower.
PROGRAMMING INSTRUCTIONS
After the startup of Long
"at the third times, all LIGHTS will OFF.
" can change the mode of Fahrenheit
"
"
"

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis