Sanotechnik SANOSPA SPA08 Bedienungsanleitung Seite 51

(2) Press " " and "
1 minute when pressing "
continually when pressing the "
will add 1 hour when pressing "
continually when pressing the "
When you set up well of the start time, you could go on to the next step.
(1)
(2)
(3)
(4)
(5)
the setting will
be finished
(3) Press " " to continual working time setting of Preheat, it will show the minimum
continue time is 5 minutes on the LCD, and this time will not flash. It will add 5 minutes
by pressing "
note that the maximum of continual time is 19 hours and 55 minutes. When you set up
well of the continual time, you could go on to the next step.
(4) Press "
" " and the temperature could be added continually till 45°C when pressing the
" " without stop. At this time, when pressing "
could return 15°C. The range of adjustment is 15~45°C.
(5) When everything is setting well, Press "
status with save.
" can change the start working time of Preheat: It will add
" each time, And add 1 hour by pressing "
" to set setting temprature of Preheat. It will add 1°C when pressing
PROGRAMMING INSTRUCTIONS
" each time and the minutes could be added the
" without stop. The adjustment range is 0~59. It
" each time, and the hours could be added the
" without stop. The adjustment range is 0~23.
Close of Preheat setting
Setting Start Time of Preheat
Setting Continual time of Preheat
Setting Temprature of Preheat
", the system will quit the Preheat setting
" each time. please
" angin, and the temperature
51