Rollei 7s Plus Bedienungsanleitung Seite 31

Button function
Parameters for the camera in video mode:
• Video resolution: Here you can define the resolution of your recordings . (When the slow-motion
function is on, playback of your recording depends on the resolution frame rate . The higher this rate is
(up to max . 240 fps), the slower you can play back the video) .
• Video length of loop recording: Here you set the length of your loop recording (only available in
loop mode) .
• Recording interval of the timelapse recording: Here you set your recording interval in timelapse
mode to determine the speed of the timelapse video (only available in lapse mode) .
• Electronic image stabilisation: With image stabilisation switched on, the video recording is smooth
(not adjustable in every video mode and resolution) .
• Distortion Correction: This function straightens out the distortion at the edge of the image caused
by the wide-angle lens (not adjustable in every video mode) .
• White balance: Adjust different white balances for optimal results .
• Exposure compensation: You can set this between -3 (image becomes darker) and +3 (image
becomes lighter) .
• Video length of timelapse recording: Here you can set the duration of your recording in timelapse
mode (only available in lapse mode) .
• Measurement mode: Here you can set the image area on which the camera focuses, e .g . at different
points, in the centre, at a point or in a matrix .
• Contour sharpness: You can set the sharpness between low, medium and high .
• Video quality: You can set the video quality between low, medium and high .
• ISO sensitivity: ISO can be adjusted automatically or manually between 100 and 6400 (not adjustab-
le in every video mode) .
• Time watermark: You can add a date and time display to your recordings (not adjustable in every
video mode) .
• Voice recording: when it is switched on, sound is recorded; when it is switched off, recordings are
without sound (not adjustable in every video mode) .
31