TensCare unicare Bedienungsanleitung Seite 41

TYPE BF
APPLIED PART
Contact duration: At least 10 minutes.
Note: The electrical specifications are nominal and subject to variation from
the listed values due to normal production tolerances of at least 5%.
Note: At least 30min required for the device to warm / cool from the
minimum / maximum storage temperature between uses until it is ready
for intended use.
Atmospheric pressure: 700hPa to 1060hPa
Equipment providing a degree of protection against
electric shock, with isolated applied part. Indicates that
this device has conductive contact with the end user.
This symbol on the unit means "Refer to Instructions for
Use"
This medical device is not water resistant and should be
protected from liquids.
Complies with EU WEEE regulations
40