Connect IT CEP-1000 Serie Benutzerhandbuch Seite 6

BLUETOOTH EARPHONES
CEP-1000 series
Earphones power-on (var. A)
EN
5
Earphones power-on (var. B)
Earphones power-off (var. A)
Earphones power-off (var. B)
Earphones power-off (var. C)
Music play and pause
Volume up
Volume down
Skip to the next track
Skip to the previous track
Answering a phone call
Rejecting a phone call
Ending a phone call
Activating the Siri and Google
voice assistants
Note:
The support for the functions in this manual depends on the paired phone.
Take out the earphones from the charging case. When taken out, the earphones turn on automatically.
Touch the multifunction touch sensor
3 seconds. The LED indicator
The earphones turn off automatically when the connection with the mobile device has been lost
for 3 minutes.
Place both earphones into the charging case.
Touch the multifunction touch sensor
3 seconds. The LED indicator
To start playing music, touch the multifunction touch sensor
To pause the music playback, touch the multifunction touch sensor
Quickly tap twice on the multifunction touch sensor
Quickly tap twice on the multifunction touch sensor
Touch the multifunction touch sensor of the right earphone
Touch the multifunction touch sensor of the left earphone
Touch the multifunction touch sensor
Touch the multifunction touch sensor
Touch the multifunction touch sensor
Quickly tap three times on the multifunction touch sensor
CONNECT IT®️ is a registered trade mark
A 10
on one of the earphones for approximately
A 9
starts flashing in blue and red.
A 10
on one of the earphones for approximately
A 9
starts shining in red.
A 10
A 10
A 10
A 10
briefly.
A 10
for approximately 1.5 seconds.
A 10
briefly.
A 10
R202103-IM
USER MANUAL
A 10
briefly.
A 10
briefly.
of the right earphone
of the left earphone.
A 10
for approximately 2 seconds.
for approximately 2 seconds.
of the right earphone.