Maintenance And Storage; Accessories - Global garden products SGT 600 Gebrauchsanweisung

10
EN

8. MAINTENANCE AND STORAGE

WARNING!
For your safety and that
of others:
– After each use, disconnect the machine
from the mains and check for damage.
– Correct maintenance is essential to maintain
the original efficiency and safety of the ma-
chine over time.
– Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working con-
dition.
– Never use the machine with worn or dam-
aged parts. Damaged parts are to be re-
placed and never repaired.
– Only use original spare parts. Parts that are
not of the same quality can seriously dam-
age the equipment and compromise safety.
WARNING!
During maintenance oper-
ations unplug the machine from the mains.
1. MOTOR COOLING
To avoid overheating and damage to the motor, al-
ways keep the cooling air vents clean and free of
sawdust and debris.
2. HEAD COIL REPLACEMENT (Fig. 8)
– Press the two side buttons (1) and remove the
cover (2).
– Lift out the coil (3).
– Reposition the spring (4) and insert the new coil,
making sure that the two ends of the line (5)
protrude from the holes (6) of the head.
– Remount the cover (2).

9. ACCESSORIES

The table contains a list of all available acces-
sories, indicating those which may be used on
each machine, marked with the symbol "
WARNING!
In consideration that the
selection, application and usage of the acces-
sory to be fitted in the variety of possible us-
Code
1911-9125-01
1911-9126-01
MAINTENANCE AND STORAGE / ACCESSORIES
All manuals and user guides at all-guides.com
3. SHARPENING THE LINE CUTTING KNIFE
– Unscrew the two screws (1) and remove the line
– Fix the line cutting knife in a vice and sharpen it
– Refit the knife on the guard.
SGT 600 - T 600 E mod. is provided with a line cut-
ting pin which does not need sharpening.
4. ELECTRIC CABLES
electric cables regularly and replace them if
they are worn or their insulation looks dam-
aged.
If the electric cable is damaged, have it replaced
with a genuine spare part by a qualified techni-
cian.
5. EXTRAORDINARY MAINTENANCE
All maintenance operations not foreseen in this
manual must be performed exclusively by your
dealer.
All and any operations performed in unauthorised
centres or by unqualified persons will totally inval-
idate the warranty.
6. STORAGE
After every work stint, clean the machine thor-
oughly to remove all dust and debris, and repair or
replace any faulty parts.
The machine must be stored in a dry place away
from the elements and out of the reach of children.
age are actions made solely by the user, the
latter assumes responsibility for damages of
". any kind due to such actions. When in doubt or
if lacking knowledge of the specificity of each
accessory, contact your retailer or specialised
gardening centre.
Model:
(Only for SGT 350) (Fig. 9)
cutting knife (2) from the guard (3).
using a flat file, being careful to retain the origi-
nal cutting angle.
WARNING!
Check the condition of the
SGT 350 SGT 600 - T 600 E