Micro Sd Card Copy; Video And Photo Download; Navigation - Chasing F1 Bedienungsanleitung

Camera stability：
7
While the probe touches the bottom, this function can be turned on, and the Fish Detector will
automatically release a piece of wire to get a more stable picture.
Automatic wiring
8
When you need to keep observing the fish and want to prevent the Fish Detector from being blown away by
the wind and waves, you can turn on the "Automatic wiring" function in the menu bar in the professional mode
to get the Fish Detector back to the shore, and the Camera probe will remain in place to continue working.
Note: When this function is turned on, the pan left, right and forward operations are locked; If you want to
lock your phone to save power, please turn off the "Auto return if disconnected" switch.
Settings:
9
Professional model: Manual wind-up/down and automatic wiring functions are supported after opening.
Enable 5G： Switch between 2.4g and 5G WIFI bands.
Station mode： After the Android device turns on this mode, you can use the Internet while connecting to
the Fish Detector.
Auto return if disconnected: After starting, if the Fish Detector is disconnected, it will auto return to the
saved return point.
Note: It is turned on by default in normal mode and can be turned off in professional mode to cooperate
with the automatic wiring function.
Low Power Protection:
10
When the power level of the drone is less than 10%, a low power reminder will be displayed in the upper
left corner. At this time, the function is still in normal use. When the power is less than 5%， the interface
popup textual box reminds the user whether the drone will turn back automatically. If you choose 'yes' ,
the drone will turn back immediately. If you choose 'cancel' ， it will cancel the turn back. If you do not
choose, the drone will return after 20 seconds.
Distance between the Fish Detector
11
and return point:
Once the return point has been set, the distance
between the Fish Detector and return point will
be displayed on the smartphone/tablet.
Distance between the Fish
Detector and return point
Adjust the Camera Angle：
13
Manually take up the line, the lens will shake left and right due to the movement of the water, when it
randomly shakes to a position that you are satisfied with, quickly release the line, the lens will stand up.
07
Double tap to hidden:
12
After unlocking, you can hide the control/function
buttons by double tap the screen for better image
viewing.

Micro SD Card Copy

1） ① Loosen the top screw on the Fish Detector,
remove the cover plate, ② then gently press the
Micro SD card to pull out.
2） After copying, insert the Micro SD card back into
the card slot, install the cover plate and lock the
screw.
*Note： 1) Before removing or inserting the Micro SD
card, turn off the Fish Detector' s power and make
sure the surface of the sealing plate is dry.
2) Pay attention to check whether the O-ring of card
slot is dropped or damaged. If the O-ring is missing
or damaged, please replace it in time.

Video and Photo Download

1） After connecting Wi-Fi, open CHASING GO2 App,
hit the Media button in the lower right corner.
Star
Connected
＞
Device Media
Media

Navigation

CHASING F1 has a vector layout propulsion system with four thrusters, which can achieve multiple-freedom
motion.
Forward /Backward
② Remove the cover and pull out the Micro SD card
① Loosen the screw
2） Find the video/photo that you want to
download. Hit the download button and the
image will be saved directly to the
phone/tablet's photo album (Download folder).
1/11
Left/Right Pan left/Pan right
08