Specifications; Applications - TEUFELBERGER EAP BEAM FIX 7331928 Herstellerinformation Und Gebrauchsanleitung

SPECIFICATIONS / APPLICATIONS

3. SPECIFICATIONS

DIMENSIONS:
Beam Size Range
Flange Thickness
MATERIALS:
All materials used in the construction of this equipment are as follows:
– Stainless Steel
– Anodized Alloy Aluminum
– Plated Alloy Steel
WEIGHT:
Model7331928: 5.60LB(2.54KG)

4. APPLICATIONS

PURPOSE:
The EAP Beam Fix is used as an anchorage connector for a personal fall arrest system. It's designed to be
attached on the Horizontal or Vertical I-Beam. The EAP Beam Fix might be used as an end termination for
either a shock-absorbing lanyard or self-retracting lifeline for fall arrest, or with a positioning lanyard for fall
restraint.
LIMITATIONS:
– Beam Flange Sizes: The EAP Beam Fix may only be installed on beams with flanges within the adjustment
range of the model. See the SPECIFICATIONS.
– Capacity: This EAP Beam Fix is designed for one person use with a combined weight (clothing, tools,
etc.) of no more than 310 lbs (140kgs). No more than one personal protective system may be connected
to this equipment at one time.
– Free Fall: Personal fall arrest systems used with this equipment must be rigged to limit the free fall to a
maximum of 6 feet. The maximum free fall must always be within the manufacturer's free fall capacity of
the system components used to arrest the fall. When a free fall greater than 6 feet and up to a maximum
of 12 feet if possible, TEUFELBERGER recommends using a personal fall arrest system incorporating
with an energy absorbing lanyard.
12
Model 7331928 : 12-in. (305mm) Maximum
2.5-in. (63.5mm) Minimum
Model 7331928: 1.5-in. (38mm) Maximum