Wellue B02 Handbuch Seite 6

Components of your blood pressure monitor
a) Measuring unit
Cuff Connector Port
Picture-02
The symbols on the LCD display
1-Systolic blood pressure;
3-lrregular heart beat symbol;
5-Time;
7-User B;
9-Mute;
11-Average symbol;
13-Cuff detecting error symbol;
15-Pulse value;
17-WHO indicator;
7
AC Adapter Port
Picture-03
2-Diastolic blood pressure;
4-Memory symbol;
6-UserA;
8-Movement error symbol;
10-Bluetooth symbol;
12-Low battery symbol;
14-Cuff detecting ok symbol;
16-Pulse symbol;
Features of Model B02:
Average value function;
1-
Double Users 120 sets memory;
2-
3-Date/time display;
Backlight display;
4-
External Power adapter support;
5-
6-Display Battery compartment;
Arm cuff;
7-
Memory (MEM) button;
8-
9-START/STOP button;
10-Date /Time Setting.
Note: Arm circumference should be measured
tape in the middle of the relaxed upper arm. Do not force cuff
connection into the opening. Make sure the
pushed into the AC adapter port.
Using your Monitor for the First Time
Activating the pre-installed batteries
Battery Installation
Use only 1.5V "AAA " alkaline batteries with this device.
1. Press the hook on the bottom of the battery cover and lift the
cover off in the direction of the arrow.
2. Install 4 "AAA " size batteries so the+ (positive)
polarities match the polarities of the battery compartment, replace
the battery cover. Make sure that the battery cover is securely in
position.
Battery replacement
Low Battery Indicator
1.When the Low Battery Indicator appears on the display, turn the
monitor off and remove all the batteries. Replace
batteries at the same time. Long-life alkaline batteries are
recommended.
with a measuring
cuff connection is not
and (negative)
with 4 new
8