Herunterladen Inhalt Inhalt Diese Seite drucken

3-Channel-Mode: 1 X Stereo-System And 1 X Mono Subwoofer - Hifonics Zeus Serie Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für Zeus Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TWIN
CH1/2
BASS BOOST
X-OVER
SUB
LP
MODE
OFF
0dB
18dB
LP/BP
HP
FULL
30Hz
250Hz
ON
BASS BOOST
LP
X-OVER

3-channel-mode: 1 x Stereo-System and 1 x Mono Subwoofer

POWER
MODE
0dB
18dB
30Hz
250Hz
LP/BP
HP
FULL
PROTECT
CH3/4
GND
REM
+12V
POWER INPUT
Loudspeaker
Loudspeaker
left, front
right, front
2 – 8 Ohms
2 – 8 Ohms
INTERCONNECTION
• Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If a separate SUB OUT from your head unit is available, use this for the LINE IN CH3/4 on the amplifier.
• Connect the speakers with SPEAKER OUTPUT + CH 1 - and + CH 2 -, and the subwoofer with the SPEAKER OUTPUT CH3/4
+ BRIDGED - of the amplifier.
• Always ensure that the total impedance load per channelpair (CH1 & CH2) is not lower than 2 ohms and the total impedance load
of the subwoofer (CH3 & CH4) is not lower than 4 ohms. Too low impedance cause high temperature and will shut down the
amplifier operation.
INPUT MODE SWITCH
• Refer to the notes on page 22.
CROSSOVER SETTINGS CH1/2 (STEREO SYSTEM)
• Refer to the notes on page 22.
LEVEL CONTROLLER CH1/2 (STEREO SYSTEM)
• Refer to the notes on page 22.
BASS BOOST CONTROLLER CH1/2 (STEREO SYSTEM)
• The BASS BOOST controller must be turned to 0 dB position in this interconnecting example .
CROSSOVER SETTINGS CH3/4 (SUBWOOFER)
• Refer to the notes on page 23.
LEVEL CONTROLLER CH3/4 (SUBWOOFER)
• Refer to the notes on page 23.
BASS BOOST CONTROLLER CH3/4 (SUBWOOFER)
• The BASS BOOST controller adjusts the bass enhancement between 0db and +18dB.
BASS REMOTE CH3/4 (SUBWOOFER)
• The enclosed BASS REMOTE CONTROLLER adjusts the bass-level e.g. from the driver's seat of the subwoofer on CH 3/4.
Please use only this enclosed bass remote controller and cable.
TWIN SUB SWITCH
• Select position OFF at the TWIN SUB switch.
24
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION EXAMPLE
INPUT
HP/BP
LEVEL
LEVEL
INPUT MODE
4CH
2CH
LOW
10Hz
1.2kHz
MIN
MAX
CH1
CH3
L
HI
HP/BP
LEVEL
OFF
ON
BASS LEVEL
10Hz
1.2kHz
MIN
MAX
CH2
CH4
R
CONTROLLER
AUTO TURN ON
LINE IN
LINE OUT
(ONLY IN HI LEVEL INPUT MODE)
BRIDGED
BRIDGED
CH1
CH2
CH3
CH4
SPEAKER
OUTPUT
FUSE
ZRX9404
Subwoofer 4 – 8 Ohms
LOG0
BLUE / WHITE
Connect Bass
Level Controller
with the enclosed
cable
HP or FULL
4CH
TWIN
CH1/2
X-OVER
BASS BOOST
LP
HP/BP
LEVEL
SUB
INPUT MODE
MODE
4CH
2CH
OFF
LP/BP
HP
FULL
0dB
18dB
30Hz
250Hz
10Hz
1.2kHz
MIN
ON
BASS BOOST
LP
HP/BP
LEVEL
X-OVER
POWER
MODE
0dB
18dB
30Hz
250Hz
BASS LEVEL
10Hz
1.2kHz
MIN
LP/BP
HP
FULL
PROTECT
CONTROLLER
CH3/4
LP/BP
OFF
GND
REM
+12V
60A
FUSE
LOG0
POWER INPUT
BLUE / WHITE
ZRX4404
Connect stereo RCA outputs (FL/FR & RL/RR or
SUB OUT) of the head unit with LINE IN CH1 / CH2
and CH3 / CH4 of the amplifier
INPUT
LEVEL
LOW
MAX
CH1
CH3
L
HI
OFF
ON
MAX
CH2
CH4
R
AUTO TURN ON
LINE IN
LINE OUT
(ONLY IN HI LEVEL INPUT MODE)
BRIDGED
BRIDGED
CH1
CH2
CH3
CH4
SPEAKER
OUTPUT

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Zrx4404Zrx6404Zrx9404

Inhaltsverzeichnis