Epson TM-U220 Bedienungsanleitung Seite 15

4. Again turn the ribbon cassette's knob 2 or 3 times in the direction
of the arrow and close the ribbon cassette cover.
Be careful not to touch the print head with your fingers when turning
the ribbon cassette knob because the print head is hot and you might
be burned.
When you replace the ribbon casette, lift the left side of the ribbon
cassette first; then lift the whole ribbon cassette.
Inserting Roll Paper
CAUTION:
Be sure to use roll paper that meets the specifications.
Be sure not to touch the manual cutter. Otherwise your fingers might be
injured.
1. Using scissors, cut the leading edge of the roll paper, as shown in
illustration
2. Turn on the printer and open the roll paper cover by using the tab,
as shown in illustration
3. Type A only: Open the unit by using the unit open lever, as shown
in illustration
4. Insert the roll paper, as shown in illustration
Note:
Note the direction the paper comes off the roll, as shown in the illustration
When using 2-ply roll paper, be sure that the top and bottom sheets are
aligned at the paper exit. See illustration
5. If you are not using a take-up spool, pull out a small amount of
roll paper and close the roll paper cover; then tear off the paper
with the manual cutter. You can skip steps 6 through 11.
6. Type A only: When using 2-ply roll paper, pull out the roll paper to
the bottom front of the printer as a guide, as shown in illustration
7. Close the unit, as shown in illustration
8. Insert the end of the bottom paper (journal paper) into the paper
take-up spool, as shown in illustration
9. Insert the paper take-up spool in the printer. Be sure that the paper
is aligned with the spool's flange, as shown in illustration
10. Feed the paper with the FEED (FEED) button so that the paper is
taken up by the spool.
CAUTION:
.
G
.
H
.
I
.
J
.
G-a
.
L
.
M
TM-U220 User's Manual 7
English
.
G
.
K
.
N