sammic AB-10 Bedienungsanleitung Seite 20

PREFACE
• This manual is an integral part of the pro-
duct, providing all the information required
to ensure correct installation, operation and
maintenance of the machine.
• Read the manual carefully, making refe-
rence to it for machine operation. Keep the
manual in a safe place where it can be ac-
cessed by all authorised operators (instal-
lers, operators and service personnel).
• The machine has been constructed in com-
pliance with the directives 2006/95/CEE
(low-voltage), 2004/108/CEE (electroma-
gnetic compatibility) and 2006/42/CEE
(machines; for certain models only).
• Installation must be performed in com-
pliance with National and Local Standards,
by professionally qualified staff and accor-
ding to the manufacturer's instructions.
• Any contractual and extra-contractual lia-
bility of the manufacturer is excluded due
to damage caused by errors during instal-
lation and use and, however, failure to com-
ply with the National and Local Standards
in force and the instructions supplied by
the manufacturer.
• Make sure that the supplied or specified
components are used.
• Before performing any cleaning or mainte-
nance operation, disconnect the appliance
from the electric power supply mains by
operating on the system switch and/or the
product switch.
• In the event of faults and/or bad functio-
ning, deactivate the appliance and do not
attempt any repairs or direct intervention.
CAUTION
THE FOLLOWING OPERATIONS
AND THOSE HIGHLIGHTED
BY THIS SYMBOL MUST NOT BE
PERFORMED BY THE APPLIANCE USER
In particular:
• Electrical connections
• Water connections
• Installation
• Testing
• Repairing machine components
• Disassembly of the appliance
and/or its components
• Adjustments and calibration
• Cleaning the appliance and maintenance of:
- Electrical parts,
- Electronic parts,
- Mechanical parts,
- Refrigeration system parts
THE TExT WITH THIS SYMBOL
IS OF PARTICULAR IMPORTANCE
OR POTENTIAL DANGER SIGNALS
i
NOTA clarifies the current operations