Risks; Important Notice; Safety Rules; Specifications Of The Machine - IGM Professional 141-DC30 Bedienungsanleitung

Operating EN
Never leave the machine unattended. Always switch
the machine off when leaving the workspace.
Watch your fingers and other body parts when
working. Never walk away from a machine without
protective guards.
Do not place anything on the machine.
Electrical connections malfunctions can be repaired
by an electrician only. Damaged electric cord must be
replaced immediately.
Any adjustments and maintenance may be carried out
when the machine is disconnected from the power
source.

3.3 Risks

Risks may arise even during proper and prescribed
use of the machine.
The danger of a workpiece flying off. Beware of noise
and dust.
Wear eye, ear and dust protection.
Use a suitable dust extraction device! Watch out for
damaged electrical cords.

3.4 Important notice

Only use the feeder in an appropriate environment.
Keep your workspace well ventilated and lighted,
avoid wet or damp environments.
Only operate the machines under temperatures
ranging from +5°to +40°C. Humidity from 30% to 95%.

3.5 Safety rules

The tool must reach working speed before feeding.
Do not overload the machine by feeding material too
quickly.
ALWAYS keep your hands away from rotating parts.
Provide additional support and stability for larger
workpieces.
Always switch off the feeder first, only then switch off
the machine that is being fed material.
Always disconnect the power cord before any repairs
or adjustments.
4

4. SPECIFICATIONS OF THE MACHINE

4.1 Machine description

10
9
11
12
1 base
2 locking lever (turning)
3 height-adjustable arm 4 locking lever (height
adjustment)
5 stand
6 height control (turning alters height) 7 locking lever
(protrusion)
8 feeder arm
9 screws (positioning joint) 10 locking lever (turning)
11 locking lever (angle of the feeder)
12 angle locking pin 13 control display
14 motor
15 control wheel of arm protrusion (turning moves
the arm)
16 feeder grip
17 roller

4.2 Technical data

Type
Motor power (400V)
Arm reach
Max. workpiece height
No. of rollers
Size of rollers
Feed speed
Weight with stand

4.3 The package includes

podavač
sloup podavače
rameno podavače
kloub pro rychlé přestavení
plánek pro vrtání základny v měřítku 1:1
manuál
6
8 7
13
14
15
1
16
17
DC30 DC40
500W 500W
460mm 460mm
250mm 250mm
3 4
120x60mm 120x60mm
2-22m/min 2-22m/min
53kg 56kg
www.igmtools.com
www.igmtools.com
5
4
3
2
pic.1