Control Panel Features; Operating The Machine; Maintenance And Control; Replacing Rollers - IGM Professional 141-DC30 Bedienungsanleitung

6.2 Control panel features

1
Switch
Speed in the range of 2-22 m/min
1 and feed
Press to turn the feed on and off
speed
Settings Press to set up the desired feed
2
button speed
Change of feed direction during
3
work: press the direction button
Feed
twice. The opposite direction will
direction
run at the lowest speed. Press the
button
4
on/off switch twice for the original
setting.

7. OPERATING THE MACHINE

After switching the machine on, let the feeder reach
its full speed before feeding any material.

8. MAINTENANCE AND CONTROL

8.1 Replacing rollers

- You can choose out of two types of rollers: Ø120 x
60 mm (141-R12060) and
Ø120 x 25 mm (141-R12025).
- The outfeed roller can be removed when working
with larger routers (pic.17).
- The infeed roller can be removed to avoid contact of
the saw blade with the feeder (pic.18).
- Use various roller combinations for different
conditions and operations.
www.igmtools.com
www.igmtools.com
3. Tlačítko směru podávání
3
2. Tlačítko nastavení
2
4
4. Tlačítko směru podávání
pic.16

8.2 Greasing

- The wheels and chains should be greased every 200
hours or 30 days using a grease gun, see section 2, the
location of grease on the displayed label (pic.20).
- Gears and chains: grease regularly.
- Recommended greases: (Shell – Alvania Grease
R2, SHELL GADUS S2 V220 2, MOBILUX EP 2; FUCHS
RENOLIT EP 2; BP ENERGREASE MM-EP 2
and other)
.17
pic
.19
pic
One roller
Set of rollers
Jedno kolo
Obr. 24
Operating EN
.18
pic
Sada kol
.20
pic
7