Important Safety Notifications; Safety Rules; Specifications Of The Machine; Machine Description - IGM Professional AF32 Bedienungsanleitung

Operating EN

3.4 Important safety notifications

Do not use the feeder in a dangerous environment.
Keep your workspace well ventilated and lighted,
avoid wet or damp environments. Only operate the
machines under temperatures ranging from +5°to
+40°C.

3.5 Safety rules

The tool must reach working speed before feeding.
Do not overload the machine by feeding material too
quickly.
ALWAYS keep your hands away from rotating parts.
Provide additional support and stability for larger
workpieces. Always switch off the feeder first,
10
9
11
8
12
14
only then switch off the machine that is being fed
material.
Always disconnect the power cord before any repairs
or adjustments.

4. SPECIFICATIONS OF THE MACHINE

4.1 Machine description

1 base
2 locking lever (turning)
3 height-adjustable arm 4 locking lever (height
adjustment)
5 stand
6 height control (turning alters height) 7 locking lever
(protrusion)
8 feeder arm
9 screws (positioning joint) 10 locking lever (turning)
11 locking lever (angle of the feeder)
12 motor
13 control wheel of arm protrusion (turning moves
the arm)
14 roller
4
6
7
13
5
3
4
2
1
pic.1

4.2 Technical data

Motor power (230/400V)
Motro power (230/400V)
Arm reach
Max. workpiece height
No. of rollers
Size of rollers
Feed speed
Weight with stand

4.3 The package includes

The AF32 Power Feeder, Feeder Arm, Feeder base
quick adjustment joint, 1:1 mounting template

5. TRANSPORT, UNPACKING AND ASSEMBLY

5.1 Transport and unpacking

The machine is not assembled due to transport.
Assemble before operating. Remove the feeder from
the packaging and place on a flat surface. Check
for any apparent transport damages, these could
damage the machine or your health.

5.2 Assembly

We recommend greasing parts during assembly (the
adjustment joint...)

5.2.1 Fastening to a machine

A) using a quick fit universal plate
- you can fasten the feeder to the machine using a
quick fit universal plate (not included).
B) Mounting to the top of a workbench
The feeder is supplied with a 1:1 template that
facilitates the mounting of the feeder onto a base
(pic.3).
240 W
188 W
260 mm
150 mm
3
80 x 30 mm
5 - 6,5 - 8 - 11 m/min
33 kg
pic.2
www.igmtools.com
www.igmtools.com