La Sommeliere SLS117 Gebrauchsanweisung Seite 35

Handle installation
▪
Open the door and carefully pull out the door gasket only at the area where the handle is
to be installed.
▪
Insert the washer and screws into the two slots on the inside of the door. Please note
the washer must be inside the slot and screws pass through the door frame.
▪
Align the handle with the screws and tighten using a head screwdriver until the handle is
flush against the door frame. Do not over-tighten as this will cause damage to the
handle assembly and stainless-steel door surface.
▪
Carefully press the door seal back into its original position.
34