Use And Function; Remote Control; Pairing Mode; Heating Power - Heating Period - Lenz Lithium Pack Rcb 1200 Bedienungs- Und Sicherheitshinweise

OPERATING INSTRUCTIONS / ENGLISH

USE AND FUNCTION

Turn on the product to the lowest heat setting by briefly pushing the control button (approximately
0.5 seconds) on the lithium pack (Fig. 1.3).
Push the control key repeatedly to switch to the next higher setting and back to standby mode
after level 3.
The respective heat setting is indicated by the illumination of the heat setting display (Fig. 1.2) on
the lithium pack.
LED, flashing – standby (no heating power)
LED, steady on – low heating power
LEDs, steady on – meduim heating power
LEDs, steady on – high heating power

REMOTE CONTROL

The lithium packs rcB 1200 / lithium packs rcB 1800 can be controlled via the Lenz heat app* for
smartphones. The lithium packs must be in "Pairing Mode" to be able to couple them properly with
the smartphone.

Pairing Mode

Please switch the desired lithium packs to "Pairing Mode". For this purpose, push the control
button (Fig. 1.3.) for approx. 10 seconds until the heat setting displays (Fig. 1.2.) are blinking and
then immediately release the control button. The heat setting display in the middle is flashing
constantly.
LED, steady on – Pairing Mode
Note: The Pairing Mode remains active for 2 minutes! If no pairing takes place during this
time, this mode will end automatically!
*The optional Lenz heat app for convenient control is available for download via the
Android Play Store and the Apple Store.
– 130 –

HEATING POWER - HEATING PERIOD

For heating power and heating period data, please see the table on the product packaging. You
can also access the data online at http://www.lenzproducts.com
The heating period per charge depends on the selected heating level, the ambient temperature,
the lithium packs and the charge state as well as age of the lithium packs.

SERVICE, STORAGE AND CARE

To ensure a long life, we recommend storing the lithium packs in a cool room (see safety
instructions) in a half-charged state. Store the lithium packs turned off (the heat level display
(Fig. 1.2) is dark) and disconnected from the heatable textile as well as the charger.
Caution: Always store the lithium packs with the contact protector installed.
For long-term storage, the lithium packs should be discharged and recharged halfway at least
every 6 months. This ensures that maximum performance is preserved for many years!
Clean the parts as needed with a soft, slightly damp cloth and a mild detergent.
Caution: Always remove the charger from the outlet before cleaning it.

DISPOSAL

Once the product has served its purpose, please dispose of it and its packaging appropriately
￭
and in an environmentally friendly manner.
Please do not dispose of the charger together with the household waste. Instead, bring the parts
￭
to a collection site for electronic waste. (d)
Take the lithium packs to the intended collection sites for used batteries. (e)
￭
Packaging materials are raw materials and can be recycled. For this reason, please recycle the
￭
packaging.
Please contact your local authority for more information.
￭
– 131 –