Technical Specifications; Safety Functions; Function Description - Lenz space warmer 1.0 Gebrauchsanweisung

OPERATING INSTRUCTIONS / ENGLISH
(a) (b)

TECHNICAL SPECIFICATIONS

240 V version: 240 VAC / 50 Hz 10 W
120 V version: 120 VAC / 60 Hz 12 W
12 V version: 12 VDC 10 W

SAFETY FUNCTIONS

Overheating protection
￭
Temperature control
￭

FUNCTION DESCRIPTION

Warms and dries boots or gloves in a few hours without damage to the material.
￭
Innovative 3 D design allows for optimal heat circulation in the boot
￭
Average surface temperature of the unit in operation is approx. +65 °C.
￭
IMPORTANT INSTRUCTIONS FOR USE
Insert the boot warmer into the boots and plug in the power cable (1)
￭
WARNING: There must be no objects in the boot (2) during drying / warming and the boots
￭
must not be placed at or on a heater.
The boot heater reaches its operating temperature within less than 5 minutes.
￭
DISPOSAL
If the device can no longer be used, please dispose of it and its packaging in an
￭
environmentally-friendly way that is in accordance with current regulations.
Do not throw the device away with normal household trash. Instead, dispose of the parts at a
￭
collection site for electrical waste. (c)
– 8 –
Packaging materials are raw materials and can be recycled. For this reason, please recycle the
￭
packaging.
Please contact your local authority for more information.
￭
(c)
Information subject to change.
This product complies with the relevant EU regulations and guidelines.
Directive 2014/35/EU
Directive 2015/863/EU
Directive 2014/30/EU
The full EU declaration of conformity can be downloaded from www.lenzproducts.com.
– 9 –