Before First Use - Sage the Nutri Juicer BJE410 Kurzanleitung

ASSEMBLY

BEFORE FIRST USE

Before using your juicer for the fi rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched off at the power
outlet and the power cord is unplugged.
Wash the fi lter bowl surround, fi lter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with a soft
cloth. Rinse and dry thoroughly. The motor base
can be wiped with a damp cloth. Dry thoroughly.
1. Place motor base on a fl at, dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the
control panel, then switch the appliance
off at the power outlet and unplug the
power cord.
2. Place fi lter bowl surround on top of the
motor base.
6
3. Align the arrows at the base of the
stainless steel fi lter basket with the
arrows on the motor drive coupling
and push down until it clicks into place.
Ensure the stainless steel fi lter basket
is fi tted securely inside the fi lter bowl
surround and onto the motor base.
4. Place the juicer cover over the fi lter bowl
surround, positioning the feed chute over
the stainless steel fi lter basket and lower
into position.
5. Raise the safety locking arm up and
locate into the two grooves on either side
of the juice cover.