Assembly
BEFORE FIRST USE
Before using your juicer for the fi rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the appliance is switched off at the power
outlet and the power cord is unplugged.
Wash the fi lter bowl surround, fi lter basket, juicer
cover, food pusher, pulp container and juice jug
and lid in warm, soapy water with a soft cloth.
Rinse and dry thoroughly.
1. Place motor base on a fl at, dry surface such
as a bench top. Ensure that the juicer is
switched to OFF at the dial, and the power
cord is unplugged.
2. Place fi lter bowl surround on top of the
motor base.
3. Align the arrows at the base of the stainless
steel fi lter basket with the arrows on the motor
drive coupling and push down until it clicks into
place to create a secure fi t with the motor base.
6
4. Place the juicer cover over the fi lter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
fi lter basket.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juice cover.
6. The safety locking arm should now be in
a vertical position and locked into place on top
of the juice cover.