Jinbei EFT-360 RGB Anleitung Seite 22

Operation
Colour temperature mode (CCT)
Press the colour temperature key (CCT) to enter
the colour temperature mode.
Adjusting the brightness
As shown in the figure, briefly press the confirm
button to highlight the brightness adjustment
symbol, press the plus or minus button to adjust
the brightness of LED light between 0 – 100%.
Pressing briefly allows a fine adjustment, pressing
longer allows a coarser adjustment.
Adjusting the colour temperature
As shown in the illustration, briefly press the
confirm key to highlight the colour temperature
symbol and press the plus or minus key to adjust
the colour temperature of the LED light between
2,000 – 10,000 K. Pressing briefly allows a fine
adjustment, pressing longer allows a coarser
adjustment.
RGB full colour mode (HSI)
As shown in the figure, briefly press the RGB (HSI)
key to access the RGB full colour mode menu,
briefly press the centre confirm key, the HUE sym-
bol on the left will turn white and press the Plus
or Minus key to move through the menu between
"HUE", "SAT" (Saturation) and "INT" (Brightness).
22