Jinbei EFT-360 RGB Anleitung Seite 21

Mounting the barndoors
1. Attach barndoors: As shown in the illustration,
insert the snap closure of the light tube into the
fixed slot on the barndoor and lock it.
2. Remove barndoors: As shown in the illustration,
push the front end of the barndoor catch inwards
to pull it out of the fixed slot in the light tube.
On / Off
1. Switch on: Set the power switch to "on" to start this
machine, and after briefly displaying the startup screen, the user
interface is displayed.
2. Turn off the power: Set the power switch to "off".
Operation
21