urmet H.265 NVR Serie Kurzanleitung Seite 34

EN
•
Mainstream: maximum resolution stream, used for video recording to Hard Disk and display on a local network
•
Substream: medium resolution stream for display in a multi-screen room or remote viewing
•
Mobile stream: optional stream that can only be activated if supported by the IP camera. This is a low-
resolution stream for remote viewing.
To configure each stream, open the "Recording" -> "Coding" page in the OSD menu and select the stream to
configure:
Once the settings have been made on the Recording menu, save the changes, exit the device menu and then
check that the "•" icon is displayed for each channel in LIVE mode, which shows that the device is recording in
accordance with the set parameters.
IMPORTANT
The default factory settings are those recommended for video streams in order to obtain the right balance
between video quality and fluidity, both for recording and LIVE display, locally or remotely.
Streaming parameters can, however, be set differently to the factory ones described above.
DS1098-031D 33