urmet H.265 NVR Serie Kurzanleitung Seite 24

EN
Cleaning the device
Rub gently with a dry cloth to remove dust and dirt.
Dip the cloth in a neutral detergent if dirt cannot be removed with a dry cloth alone.
Do not use spray products to clean the device. Do not clean the device using volatile liquids (such a petrol, alcohol,
solvents, etc.) or chemically treated cloths to prevent deformation, deterioration or scratches to the paint finish.
Disconnect the device from the electrical outlet before any cleaning or maintenance operations.
Hard Disk
The hard disk installed in this device is sensitive to shock, temperature changes and vibrations. Failure to adopt
suitable precautions could compromise the proper functioning of the device and cause loss of data from the hard
disk.
If repairs are required, it is advisable to backup all important data before taking the device to the service centre.
Urmet S.p.A. is not liable for the loss of stored data.
Hard disks must be installed by qualified technical personnel or by contacting the technical support centre.
Image recording
This device was designed to record images. It is not a burglar alarm. URMET SpA cannot be held liable for loss or
damage due to theft suffered by the user.
Make a test recording before using the device to ensure that it is working properly. URMET SpA is not liable for loss
of stored data due to loss or damage caused by failure to follow the instructions for installation and use, improper
use or malfunctioning of the device. This device contains precision electronic components. Protect the device from
shocks to ensure proper image recording.
Privacy and Copyright
The NVR is a device for CCTV systems. The recording of images is subject to the laws in force in the country of
use. Recording of images protected by copyright is forbidden.
Product users are responsible for checking and complying with all local rules and regulations regarding monitoring
and the recording of video signals. The manufacturer SHALL NOT BE LIABLE for any use of this product not in
compliance with the laws currently in force.
Software upgrade
Regularly check the specific section of the manufacturer's website at www.urmet.com >> Download >> Software for
software upgrades.
Firmware upgrade
Contact URMET SpA Customer Service to check the availability of firmware upgrades.
Network configuration
The factory default IP address for the NVR is assigned via DHCP.
From the NVR Network OSD Menu, assign the NVR an IP address that has not been assigned to other devices in
order to prevent any network conflict.
Once the NVR had been assigned a suitable address, it can be connected to the network.
Network connections
When connecting a remote PC (using client software or a browser), bear in mind that all video channels used by
the PC correspond to a "unicast" type connection (TCP, RTP, UDP).
DS1098-031D 23