Installation; Mechanical Mounting - Siko Ma505 Originalmontageanleitung

MA505
16

Installation

CAUTION
NOTICE
4 Installation

4.1 Mechanical mounting

Magnetic display failure
` When mounting pay attention to the IP type of protection (see chap-
ter 8).
` Avoid impact on the device.
` Do not modify the device in any way.
When combined with sensor MSA! Before mounting sensor and/or mag-
netic tape, please read chapter
necessary alignment length is available; that sensor and magnetic tape
are aligned correctly.
For benchtop housing accessories see chapter 7.
Mounting (Fig. 1):
1. Push the device into the panel cut-out
the housing loosely.
2. Press the lateral centering
the cut-out until the panel clips
1


Fig. 1: Installation
MA505 · Date 28.08.2015 · Art. No. 80475 · Mod. status 329/15
6 (sensor alignment) and ensure that: the
until the panel clips
1
slightly down and push the housing into
3
snap completely.
2

English
hold
2
Panel cut-out
1
Panel clip
2
Centering
3